AWG 64 MB MEMORY CARD FOR WII Manual de usuario descargar pdf (Pagina 14)

USER MANUAL 1.4 | EC1000

Berghof Automation GmbH | Harretstrasse 1 | 72800 Eningen | www.berghof.com

EC1000_HB_en_2D1652005ZD00.docx | 2VF100179FE04.docx

Ethernet Controller EC1000

Energy supply (24 V power supply unit)

Supply voltage

+24 VDC (-20 % / +25 %) SELV max. proportion of a.c. voltage 5 %

Power consumption

typ. 0.3 A, max. 0.3 A with +24 VDC, fuses depending on number of

connected extension modules, max. 2.5 A

Reverse voltage protection

Yes

Potential isolation

Bridging in case of power failure

10 ms at < 20.4 VDC (at max. external bus load of 5 V / 2 A) Power

Fail < 19.2 VDC

Ethernet interface

Number / type of interface

1x 10/100 Base T

Connection technology

1x RJ45

EtherCAT interface

Number / type of interface

1x EtherCAT E-bus, lateral 10-pin connection

Connection technology

Series connectors on right-hand side

USB interfaces

Number / type of interface

1 x Host USB Rev. 1.1

Number of mating cycles

max. 1.000

CAN-Bus interfaces

Number / type of interfaces

1x CAN in front (on 2x 5-pin multipoint connector COM / CAN)

Potential isolation

Yes (galvanic isolation)

Transmission rate

ISO 11898 max. 1 Mbit/s

Terminating resistor

external via plug-in connector

Serial interfaces

Number / type of interfaces

1x RS232 3 wire connection to 2x 5-pin multi-point connector in front

panel (RS232+CAN) (RX,TX,GND)

Potential isolation

Yes (galvanic isolation)

Transmission rate

max. Baud rate 115 kBaud

Other functions

Realtime clock

Yes, accumulator battery-buffered (maintenance-free)

SD card

1 SD card slot

Digital input

24 V (-20 % / +25 %)

Slot for left-hand extension module for communication (optional)

Number / type of interfaces

prepared for 1x LAN, 1x CAN, 1x RS485 / 1x RS232

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Comentarios a estos manuales

Sin comentarios

AWG 64 MB MEMORY CARD FOR WII Manual de usuario Pagina 14

Comentarios a estos manuales